Brick veneer
A brick veneer, also known as a brick slip, is a thin layer of brick that is used aesthetically as a form of surface finish rather than structurally. Conventional brick walls typically support the structural loads of the building, whereas brick veneers are applied for decorative purposes.
They are generally formed from thin brick slips, which may be as little as 20 mm thick (compared to 102.5 mm for a standard brick). Brick veneers can be used for both indoor and outdoor applications and can be applied to almost any surface. A range of special brick slips are available for conditions such as corners, to continue the illusion that walls are constructed from full bricks.
For interior applications, such as around fireplaces, brick veneers may laid in a similar way to tiles. Mortar (or some other adhesive) is spread on the wall and the bricks are set into place on it, separated during drying by plastic spacers. Once bed mortar has set, the brick joints are pointed using more mortar. Other 'veneers' are available in rolls, as a form of three-dimensional wallpaper.
For exterior applications, the veneer may be laid in a similar way to internal applications, as a form of cladding. However, they may also be installed as a free-standing panels (often prefabricated off site, and sometimes including other components such as insulation), anchored back to the structural frame. This type of veneer is vertically self-supporting, but in multi-storey buildings, shelf angles may be used to provide a horizontal expansion joint, usually at the floor edges. This allows for expansion of the brick and potential shrinkage of the frame.
There are several advantages to using brick veneers:
- They are relatively easy and quick to install.
- They are not as heavy as other forms of masonry, which reduces structural loading.
- Cavities behind external brick veneers can aid insulation.
- They are durable and fire-resistant.
- They can achieve a wide range of decorative functions
- They require little maintenance.
Disadvantages include:
- They are more susceptible to damage as they are thinner than conventional brick walls.
- They do not contribute to structural integrity.
- They can be susceptible to water damage.
- Over time, the veneer will require re-pointing with new mortar.
[edit] Related articles on Designing Buildings
Featured articles and news
Boiler Upgrade Scheme and certifications consultation
Summary of government consultation which closes 11 June 2025.
Deputy editor of AT, Tim Fraser, discusses the newly formed society with its current chair, Chris Halligan MCIAT.
Barratt Lo-E passivhaus standard homes planned enmasse
With an initial 728 Lo-E homes across two sites and many more planned for the future.
Government urged to uphold Warm Homes commitment
ECA and industry bodies write to Government concerning its 13.2 billion Warm Homes manifesto commitment.
Places of Worship in Britain and Ireland, 1929-1990. Book review.
The emancipation of women in art.
CIOB Construction Manager of the Year 2025
Just one of the winners at the CIOB Awards 2025.
Call for independent National Grenfell oversight mechanism
MHCLG share findings of Building Safety Inquiry in letter to Secretary of State and Minister for Building Safety.
The Architectural Technology Awards
AT Awards now open for this the sixth decade of CIAT.
50th Golden anniversary ECA Edmundson awards
Deadline for submissions Friday 30 May 2025.
The benefits of precast, off-site foundation systems
Top ten benefits of this notable innovation.
Encouraging individuals to take action saving water at home, work, and in their communities.
Takes a community to support mental health and wellbeing
The why of becoming a Mental Health Instructor explained.
Mental health awareness week 13-18 May
The theme is communities, they can provide a sense of belonging, safety, support in hard times, and a sense purpose.
Mental health support on the rise but workers still struggling
CIOB Understanding Mental Health in the Built Environment 2025 shows.
Design and construction material libraries
Material, sample, product or detail libraries a key component of any architectural design practice.
Construction Products Reform Green Paper and Consultation
Still time to respond as consultation closes on 21 May 2025.
Resilient façade systems for smog reduction in Shanghai
A technical approach using computer simulation and analysis of solar radiation, wind patterns, and ventilation.
Comments
There are many examples of brick slip failures from buildings constructed during the 1960s and 70s which have given slips a 'bad name'. Manufacturers of modern bricks slips are quick to point out that many lessons have been learned and that advances in adhesive and testing technologies have eliminated these fears. Despite this, an internal research study by materials specialist at Arup found that risks still exist around adhesively-bonded brick slip systems, and concludes by recommending the use of mechanically fixed (rather than adhesively fixed) systems only. A summary of the study is given here: https://www.linkedin.com/pulse/brick-slip-cladding-systems-safe-alexis-harrison/